New Posts New Posts RSS Feed - Problems with Hi-Phone USB Desktop on Windows 7
  FAQ FAQ  Forum Search   Events   Register Register  Login Login

Way2call telephony device is your ultimate telephony integration solution!

Problems with Hi-Phone USB Desktop on Windows 7

 Post Reply Post Reply Page  12>
Author
BrianFella View Drop Down
Newbie
Newbie


Joined: Oct 13 2010
Status: Offline
Points: 10
Post Options Post Options   Thanks (0) Thanks(0)   Quote BrianFella Quote  Post ReplyReply Direct Link To This Post Topic: Problems with Hi-Phone USB Desktop on Windows 7
    Posted: Oct 13 2010 at 11:35am
I have a USB HiPhone Desktop that I am using.  I have it successfully installed & working on my XP laptop.

However, on my 64 bit Windows 7 laptop, I CANNOT get it to work correctly.  I have tried installing both sets of 64 bit drivers on the download page, & I even tried installing the beta version of the same.  I also tried using the default XP drivers.  All was to no avail.  Ouch  I cannot get it to record me during the test, and it seems like it is not detecting a dial tone.  I hear it, but it does not actually dial the # I give it in the test.  Again, everything works flawlessly in XP.

HELP!  Dead
Back to Top
doronsh View Drop Down
Way2call
Way2call


Joined: Mar 16 2009
Status: Offline
Points: 95
Post Options Post Options   Thanks (0) Thanks(0)   Quote doronsh Quote  Post ReplyReply Direct Link To This Post Posted: Oct 13 2010 at 12:35pm

The Hi-Phone firmware version should be WIN 7 compatible.

What is your Hi-Phone Device fw version?
Back to Top
BrianFella View Drop Down
Newbie
Newbie


Joined: Oct 13 2010
Status: Offline
Points: 10
Post Options Post Options   Thanks (0) Thanks(0)   Quote BrianFella Quote  Post ReplyReply Direct Link To This Post Posted: Oct 13 2010 at 11:17pm
Hmm...well, I have a new problem.  The Hi-Phone was working great on the XP, but now it won't even turn on when plugged in.  It's like it's broken or something.

Assuming that I can get that worked out, here is my answer to what you said before.  You asked about the firmware - I cannot say what version it is, but I suspect it's "out of date."  But on your download page, it is stated "Please make sure that the file you use matches  your product's P/N. Using the wrong file may damage your device and void the warranty!"  Below that, it says "Hi-Phone Desktop USB, P/N HD00USGR01  (Must run on WIN XP)*
  Version: 4.02.36
  Updated: 18-Nov-2009   "

The "*" refers to a statement at the bottom of the page, "* The firmware upgrade supports WIN XP only.  WIN Vista, WIN 7,  and WIN server 2008 are not supported."    This would seem to indicate that Windows 7 is not supported, and further after this it says, "Using the wrong Operating System for firmware upgrade may damage your device and void the warranty!"    Rather ominous, no?  Sooooo.....if you ask me to update the firmware, is way2call accepting any liability for problems incurred as a result thereof?  Or am I misunderstanding what is written?

I appreciate your help, but I just want to make sure I'm not damaging the equipment.  It's not my equipment, although the warranty may have already expired.  Nonetheless, I don't want to damage the unit.  

On a 2nd note...any idea why the unit is not powering on after working perfectly today?

Thanks much!
Back to Top
BrianFella View Drop Down
Newbie
Newbie


Joined: Oct 13 2010
Status: Offline
Points: 10
Post Options Post Options   Thanks (0) Thanks(0)   Quote BrianFella Quote  Post ReplyReply Direct Link To This Post Posted: Oct 13 2010 at 11:23pm
OK...the Hi-Phone has resurrected.  I unplugged it and plugged back in and it's working.  I think I tried that before, but it's late....Clap

This enabled me to check the firmware version, which is 4.52.07

Thanks, and cheers!
Back to Top
doronsh View Drop Down
Way2call
Way2call


Joined: Mar 16 2009
Status: Offline
Points: 95
Post Options Post Options   Thanks (0) Thanks(0)   Quote doronsh Quote  Post ReplyReply Direct Link To This Post Posted: Oct 14 2010 at 12:03am

Its very simple.
New device comes with WIN 7 compatible fw.
Since you are using older fw version, it should be updated to support the changes made by MS in the WIN 7 audio system.
The firmware utility run only on WIN XP.
Once the fw has been updated on WIN XP, the device works on WIN 7.
1. Connect the device to a PC machine with WIN XP
2. Download the fw upgrade for your device (make sure the part number match)
3. Read the Hi-Phone Desktop  USB firmware update  reference guide (It always good)
4. Run the fw upgrade utility
5. Disconnect the device from the XP machine.
6. Connect the device  to a WIN 7 machine
7. :-)

Dont use WIN 7 to upgrade the device fw.
Dont use wrong device part number when choosing the fw utility.
 
Back to Top
BrianFella View Drop Down
Newbie
Newbie


Joined: Oct 13 2010
Status: Offline
Points: 10
Post Options Post Options   Thanks (0) Thanks(0)   Quote BrianFella Quote  Post ReplyReply Direct Link To This Post Posted: Oct 14 2010 at 12:37pm
Thank you...that makes a lot of sense.  I'm beginning the process now on the XP machine.  One question - I assume I need the most recent 64 bit drivers on the Win 7 machine?
Back to Top
doronsh View Drop Down
Way2call
Way2call


Joined: Mar 16 2009
Status: Offline
Points: 95
Post Options Post Options   Thanks (0) Thanks(0)   Quote doronsh Quote  Post ReplyReply Direct Link To This Post Posted: Oct 14 2010 at 1:41pm
Yes, Use the latest Hi-Phone 64 bit drivers
Back to Top
BrianFella View Drop Down
Newbie
Newbie


Joined: Oct 13 2010
Status: Offline
Points: 10
Post Options Post Options   Thanks (0) Thanks(0)   Quote BrianFella Quote  Post ReplyReply Direct Link To This Post Posted: Oct 18 2010 at 4:19pm
Excellent.  Problem solved!  Thanks so much for your help.

Another challenge - the software that I use to make calls is acting like the way2call cannot hear the phone ringing or people speaking.  It should hang up the phone after 4-5 rings and dial the next #, and it should also make my microphone go hot when someone answers.

Any idea why that would work fine on XP but not on Win 7?

Thanks!  Wink
Back to Top
doronsh View Drop Down
Way2call
Way2call


Joined: Mar 16 2009
Status: Offline
Points: 95
Post Options Post Options   Thanks (0) Thanks(0)   Quote doronsh Quote  Post ReplyReply Direct Link To This Post Posted: Oct 19 2010 at 9:04am
What software application are you using?
Also please provide your setting. Are you using headset connected to the Hi-Phone, or connected to the PC?
Back to Top
BrianFella View Drop Down
Newbie
Newbie


Joined: Oct 13 2010
Status: Offline
Points: 10
Post Options Post Options   Thanks (0) Thanks(0)   Quote BrianFella Quote  Post ReplyReply Direct Link To This Post Posted: Oct 19 2010 at 1:37pm
OK...the application I'm using is very proprietary & I doubt you'd have any experience with it.  It is a program called "Hinkle" and it's used by the company Direct Buy for telemarketing.

I plug my headset into a Plantronics amplifier, which is plugged into the Way2Call USB device.  I do not know what you mean by "setting."  

My driver settings are as follows:

Way2call Drivers Information:

Package Version: 2.01.16.1 64bit

OS version: 6.1.7600  

Device Information:

1. Hi-Phone Desktop USB 003784
    Firmware Version: 4.02.36
    P/N: HD00USGR01
    S/N: 1011-07-003784
 

Software Components: 

File: ScTsp64.tsp
    Description: Way2call Multiple Hi-Phone Devices TSP
    Version: 2.01.16
    Build: 0

File: scwiz32.exe
    Description: Way2Call Multiple Hi-Phone Devices PBX Wizard
    Version: 2.00.34
    Build: 0

File: TestWiz.exe
    Description: Way2call Multiple Hi-Phone Devices Test Wizard
    Version: 2.00.34
    Build: 0

File: w2cMdSound.exe
    Description: Way2call Multiple Devices As Sound Cards
    Version: 1.0.0.7
    Build: 0

File: w2cTspSetup64.exe
    Description: Way2call TAPI Setup
    Version: 1.0.0.2
    Build: 0

File: ml_setup.exe
    Description: Way2call Multiple Hi-Phone Devices Drivers installer
    Version: 2.0.2.11
    Build: b002

File: w2cMultiInfo64.exe
    Description: Way2call drivers infromation
    Version: 1.0.0.4
    Build: 0

File: w2cUSB.dll
    Description: Hi-Phone User Mode Device Driver
    Version: 2.0.9.2
    Build: b0001

File: w2cUSBM.dll
    Description: Way2call Multiple Hi-Phone Devices DLL
    Version: 1.3.7.0
    Build: b004

File: w2cUSBM64.dll
    Description: Way2call Multiple Hi-Phone Devices DLL
    Version: 1.3.7.0
    Build: b002


Audio IN devices: 
  0. Microphone (Hi-Phone Desktop US
  1. Digital Audio Interface (Hi-Pho
  2. Microphone (Realtek High Defini

Audio OUT devices: 
  0. Speakers (Realtek High Definiti
  1. Speakers (Hi-Phone Desktop USB)
  2. Realtek Digital Output (Realtek

Back to Top
 Post Reply Post Reply Page  12>

Forum Jump Forum Permissions View Drop Down



This page was generated in 0.094 seconds.