OnAsyncPlaybackDone never fires

Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic

   Hi all...

I wrote a simple program using HiPhone Desktop USB able to dial a phone number and play a wave file.
When wave playback finish the program should hang up and terminate but the event OnAsyncPlaybackDone never fires! (tested putting a breakpoint into event handler routine).

This is what "Way2Call Log" give me:
 0 15:26:57:679 [1156] » DLL_PROCESS_ATTACH
 1 15:27:01:460 [1156] » InitializeDriver() Called, dwReserved=0, DLL Version: 13700
 2 15:27:01:585 [1156] » Dev#0 Wave Out name 'Hi-Phone Desktop USB'
 3 15:27:01:585 [1156] » Dev#0 Wave In name 'Hi-Phone Desktop USB'
 4 15:27:01:585 [1156] » Dev#0 Wave Aux name 'Hi-Phone Desktop USB Aux'
 5 15:27:01:585 [1156] » Dev#0 Mixer Name 'Hi-Phone Desktop USB'
 6 15:27:02:070 [1156] » InitializeDriver() End OK, Num Devs = 1
 7 15:27:02:070 [1156] » Dev #0 Name: Hi-Phone Desktop USB 018338
 8 15:27:02:070 [1156] » Dev#0 Open Called. DLL: 13700, Fw: 4.03.36, SN: HD00USGR02102731018338
 9 15:27:02:085 [1156] » Dev#0 Event: Device Reset Occured. ExData 0x0000, TID: 0x0A68
 10 15:27:02:117 [1156] » Dev#0 Coutry Code: 39
 11 15:27:02:132 [1156] » Dev#0 Open Completed.
 12 15:27:10:664 [1156] » Dev#0 Monitor Custom Tones called,  1 tone items.
 13 15:27:10:679 [1156] » Dev#0 GetLineWirePlugged called.
 14 15:27:10:679 [1156] » Dev#0 GetLineWirePlugged error: < W2C_DEV_MODEL_LITE.
 15 15:27:10:695 [1156] » Dev#0 Call Started: 48 TID: DB4
 16 15:27:10:695 [1156] » Dev#0 Command: Switch: Line - Audio Stream, Phone Monitor
 17 15:27:10:695 [1156] » Dev#0 Command: Mute Phone
 18 15:27:11:039 [1156] » Dev#0 Command: DTMF Dial 4
 19 15:27:11:226 [1156] » Dev#0 Command: DTMF Dial 8
 20 15:27:11:414 [1156] » Dev#0 Command: Start Analysis
 21 15:27:11:429 [1156] » Dev#0 Opened wave Aux: ID=2, Name=Hi-Phone Desktop USB Aux. 
 22 15:27:11:445 [1156] » Dev#0 Event: Call - Dialing done. ExData 0x0000, TID: 0x0DB4
 23 15:27:11:445 [1156] » Dev#0 Call Thread Ended with 0, TID: DB4
 24 15:27:15:226 [1156] » Dev#0 Command: Un-Mute Phone
 25 15:27:15:226 [1156] » Dev#0 Event: Call answered: Voice detected. ExData 0x0000, TID: 0x10D4
 26 15:27:15:226 [1156] » Dev#0 Command: Un-Mute Phone
 27 15:27:15:242 [1156] » Dev#0 Command: Switch: Phone - Audio Stream - Line
 28 15:27:15:242 [1156] » Dev#0 Playback Thread Started
 29 15:27:19:570 [1156] » Dev#0 Event: Call answered: Voice detected. ExData 0x0000, TID: 0x10D4
 30 15:27:22:773 [1156] » Dev#0 Event: Tone Monitored. ExData 0x0000, TID: 0x10D4
 31 15:27:24:242 [1156] » Dev#0 Event: Call answered: Voice detected. ExData 0x0000, TID: 0x10D4
 32 15:27:24:820 [1156] » Dev#0 Event: Call answered: Voice detected. ExData 0x0000, TID: 0x10D4
 33 15:27:26:804 [1156] » Dev#0 Event: Call answered: Speech detected. ExData 0x0000, TID: 0x10D4
 34 15:27:30:773 [1156] » Dev#0 Event: Tone Monitored. ExData 0x0000, TID: 0x10D4
 35 15:27:31:351 [1156] » Dev#0 Event: Call answered: Voice detected. ExData 0x0000, TID: 0x10D4
 36 15:27:35:835 [1156] » Dev#0 Event: Busy detected. ExData 0x0000, TID: 0x10D4
 37 15:27:38:835 [1156] » Dev#0 Event: Busy detected. ExData 0x0000, TID: 0x10D4
 38 15:27:41:835 [1156] » Dev#0 Event: Busy detected. ExData 0x0000, TID: 0x10D4
 39 15:27:44:851 [1156] » Dev#0 Event: Busy detected. ExData 0x0000, TID: 0x10D4
 40 15:27:47:867 [1156] » Dev#0 Event: Busy detected. ExData 0x0000, TID: 0x10D4
 41 15:27:50:867 [1156] » Dev#0 Event: Busy detected. ExData 0x0000, TID: 0x10D4
 42 15:27:53:804 [1156] » Dev#0 Event: Busy detected. ExData 0x0000, TID: 0x10D4
 43 15:27:56:820 [1156] » Dev#0 Event: Busy detected. ExData 0x0000, TID: 0x10D4

Any ideas?

Author	Message Topic Search Topic Options Post Reply Create New Topic Printable Version Translate Topic
andrea Members Profile Send Private Message Find Members Posts Add to Buddy List Newbie Joined: Jan 22 2010 Status: Offline Points: 1	Post Options Post Reply Quote andrea Report Post Thanks(0) Quote Reply Topic: OnAsyncPlaybackDone never fires Posted: Jan 22 2010 at 10:10am
	Hi all... I wrote a simple program using HiPhone Desktop USB able to dial a phone number and play a wave file. When wave playback finish the program should hang up and terminate but the event OnAsyncPlaybackDone never fires! (tested putting a breakpoint into event handler routine). This is what "Way2Call Log" give me: 0 15:26:57:679 [1156] » DLL_PROCESS_ATTACH 1 15:27:01:460 [1156] » InitializeDriver() Called, dwReserved=0, DLL Version: 13700 2 15:27:01:585 [1156] » Dev#0 Wave Out name 'Hi-Phone Desktop USB' 3 15:27:01:585 [1156] » Dev#0 Wave In name 'Hi-Phone Desktop USB' 4 15:27:01:585 [1156] » Dev#0 Wave Aux name 'Hi-Phone Desktop USB Aux' 5 15:27:01:585 [1156] » Dev#0 Mixer Name 'Hi-Phone Desktop USB' 6 15:27:02:070 [1156] » InitializeDriver() End OK, Num Devs = 1 7 15:27:02:070 [1156] » Dev #0 Name: Hi-Phone Desktop USB 018338 8 15:27:02:070 [1156] » Dev#0 Open Called. DLL: 13700, Fw: 4.03.36, SN: HD00USGR02102731018338 9 15:27:02:085 [1156] » Dev#0 Event: Device Reset Occured. ExData 0x0000, TID: 0x0A68 10 15:27:02:117 [1156] » Dev#0 Coutry Code: 39 11 15:27:02:132 [1156] » Dev#0 Open Completed. 12 15:27:10:664 [1156] » Dev#0 Monitor Custom Tones called, 1 tone items. 13 15:27:10:679 [1156] » Dev#0 GetLineWirePlugged called. 14 15:27:10:679 [1156] » Dev#0 GetLineWirePlugged error: < W2C_DEV_MODEL_LITE. 15 15:27:10:695 [1156] » Dev#0 Call Started: 48 TID: DB4 16 15:27:10:695 [1156] » Dev#0 Command: Switch: Line - Audio Stream, Phone Monitor 17 15:27:10:695 [1156] » Dev#0 Command: Mute Phone 18 15:27:11:039 [1156] » Dev#0 Command: DTMF Dial 4 19 15:27:11:226 [1156] » Dev#0 Command: DTMF Dial 8 20 15:27:11:414 [1156] » Dev#0 Command: Start Analysis 21 15:27:11:429 [1156] » Dev#0 Opened wave Aux: ID=2, Name=Hi-Phone Desktop USB Aux. 22 15:27:11:445 [1156] » Dev#0 Event: Call - Dialing done. ExData 0x0000, TID: 0x0DB4 23 15:27:11:445 [1156] » Dev#0 Call Thread Ended with 0, TID: DB4 24 15:27:15:226 [1156] » Dev#0 Command: Un-Mute Phone 25 15:27:15:226 [1156] » Dev#0 Event: Call answered: Voice detected. ExData 0x0000, TID: 0x10D4 26 15:27:15:226 [1156] » Dev#0 Command: Un-Mute Phone 27 15:27:15:242 [1156] » Dev#0 Command: Switch: Phone - Audio Stream - Line 28 15:27:15:242 [1156] » Dev#0 Playback Thread Started 29 15:27:19:570 [1156] » Dev#0 Event: Call answered: Voice detected. ExData 0x0000, TID: 0x10D4 30 15:27:22:773 [1156] » Dev#0 Event: Tone Monitored. ExData 0x0000, TID: 0x10D4 31 15:27:24:242 [1156] » Dev#0 Event: Call answered: Voice detected. ExData 0x0000, TID: 0x10D4 32 15:27:24:820 [1156] » Dev#0 Event: Call answered: Voice detected. ExData 0x0000, TID: 0x10D4 33 15:27:26:804 [1156] » Dev#0 Event: Call answered: Speech detected. ExData 0x0000, TID: 0x10D4 34 15:27:30:773 [1156] » Dev#0 Event: Tone Monitored. ExData 0x0000, TID: 0x10D4 35 15:27:31:351 [1156] » Dev#0 Event: Call answered: Voice detected. ExData 0x0000, TID: 0x10D4 36 15:27:35:835 [1156] » Dev#0 Event: Busy detected. ExData 0x0000, TID: 0x10D4 37 15:27:38:835 [1156] » Dev#0 Event: Busy detected. ExData 0x0000, TID: 0x10D4 38 15:27:41:835 [1156] » Dev#0 Event: Busy detected. ExData 0x0000, TID: 0x10D4 39 15:27:44:851 [1156] » Dev#0 Event: Busy detected. ExData 0x0000, TID: 0x10D4 40 15:27:47:867 [1156] » Dev#0 Event: Busy detected. ExData 0x0000, TID: 0x10D4 41 15:27:50:867 [1156] » Dev#0 Event: Busy detected. ExData 0x0000, TID: 0x10D4 42 15:27:53:804 [1156] » Dev#0 Event: Busy detected. ExData 0x0000, TID: 0x10D4 43 15:27:56:820 [1156] » Dev#0 Event: Busy detected. ExData 0x0000, TID: 0x10D4 Any ideas?

doronsh Members Profile Send Private Message Find Members Posts Add to Buddy List Way2call Joined: Mar 16 2009 Status: Offline Points: 95	Post Options Post Reply Quote doronsh Report Post Thanks(0) Quote Reply Posted: Jan 22 2010 at 10:25am
	Console applications does not have a window, and a window message "pump". The 'Playback Done' event is triggered (internally in the Hi-Phone DLL) via a window message. The solution is to 'pump messages' . Note: the 'pumping' thread must be the same thread that called w2cUsbM_InitializeDriver(..) We"ll put a note on it in the SDK.