Print Page | Close Window

Wait for dialtone

Printed From: Way2call Communications
Category: Hi-Phone Software Development Kit (SDK)
Forum Name: Hi-Phone DLL
Forum Description: Discussion on the Hi-Phone product family, its DLL, samples and development tools
Printed Date: Jun 08 2023 at 2:19pm

Topic: Wait for dialtone
Posted By: hpman28
Subject: Wait for dialtone
Date Posted: Feb 01 2010 at 2:17pm

We sometimes have an issue of getting dial tone.

Some of the lines have answering machines messages that causes the lines not to have dial tone straight away.

I tried using the "W" command in the way2call application, but it's not working.

Is there a way I can "delay" the dial up in a second or two.


Posted By: doronsh
Date Posted: Feb 01 2010 at 3:22pm

Try to increase the wait for a dial tone period

The default is 6 sec.

This can be changed in the TAPI setup

Go to: Start menu >>> programs >>> Way2call multiple Hi-Phone devices >>> TAPI setup


Wait for a dial tone Timeout default is 6 se. Try to increase this time.

Uncheck the wait for a dial tone may solve it as well.

Print Page | Close Window