Way2call telephony device discussion forum : Routing line through speakers http://www.way2call.com/forum/ This is an XML content feed of; Way2call telephony device discussion forum : Hi-Phone and .NET : Routing line through speakers Sat, 08 Aug 2026 09:03:06 +0000 Fri, 23 Apr 2010 11:32:38 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 10.14 360 www.way2call.com/forum/RSS_post_feed.asp?TID=48 Way2call telephony device discussion forum http://www.way2call.com/forum/forum_images/way2call_logo.jpg http://www.way2call.com/forum/ Routing line through speakers : In order to do so, you should... http://www.way2call.com/forum/routing-line-through-speakers_topic48_post222.html#222 Author: doronsh
Subject: 48
Posted: Apr 23 2010 at 11:32am

In order to do so, you should attach the selected Line to the headset

See code to attach a phone to a specific line.

You should do similar, BUT with headset attach.

This way, the audio from the Line will be monitored by the Headset speaker output.

case IDC_CHK_ATTACH_PHONE:
   if(IsDlgButtonChecked(hDlg, LOWORD(wParam)))
   {
    DWORD dwFlags=0;
 
    if(IsDlgButtonChecked(hDlg, IDC_CHK_ATTACH_PHONE_HOOK))
     dwFlags |= W2C_TERMMODE_HOOKSWITCH;
 
    if(IsDlgButtonChecked(hDlg, IDC_CHK_ATTACH_PHONE_RING))
     dwFlags |= W2C_TERMMODE_RINGER;
 
    if(IsDlgButtonChecked(hDlg, IDC_CHK_ATTACH_PHONE_AUDIO_TO_LINE))
     dwFlags |= W2C_TERMMODE_MEDIATOLINE;
 
    if(IsDlgButtonChecked(hDlg, IDC_CHK_ATTACH_PHONE_AUDIO_FROM_LINE))
     dwFlags |= W2C_TERMMODE_MEDIAFROMLINE;
    
    w2cUsbM_SetTerminal(m_SelfID, W2C_TERMINAL_PHONE, dwFlags,0);
   }
   else
    w2cUsbM_SetTerminal(m_SelfID, W2C_TERMINAL_PHONE, W2C_TERMMODE_NONE,0);
 
   break;
]]> Fri, 23 Apr 2010 11:32:38 +0000 http://www.way2call.com/forum/routing-line-through-speakers_topic48_post222.html#222 Routing line through speakers : I would like to monitor the outbound... http://www.way2call.com/forum/routing-line-through-speakers_topic48_post221.html#221 Author: mattj
Subject: 48
Posted: Apr 23 2010 at 11:20am

I would like to monitor the outbound calls as they are happening.]]> Fri, 23 Apr 2010 11:20:29 +0000 http://www.way2call.com/forum/routing-line-through-speakers_topic48_post221.html#221 Routing line through speakers : What is a beep test? What exactly... http://www.way2call.com/forum/routing-line-through-speakers_topic48_post220.html#220 Author: doronsh
Subject: 48
Posted: Apr 23 2010 at 11:16am

What is a beep test?

What exactly are you trying to do?

]]> Fri, 23 Apr 2010 11:16:06 +0000 http://www.way2call.com/forum/routing-line-through-speakers_topic48_post220.html#220 Routing line through speakers : I've upgraded to the PWD... http://www.way2call.com/forum/routing-line-through-speakers_topic48_post219.html#219 Author: mattj
Subject: 48
Posted: Apr 23 2010 at 10:41am

I've upgraded to the PWD model have plugged in some speakers and it still doesn't pass the beep test. Please advise.]]> Fri, 23 Apr 2010 10:41:58 +0000 http://www.way2call.com/forum/routing-line-through-speakers_topic48_post219.html#219 Routing line through speakers : The Hi-Phone Maestro IVR model... http://www.way2call.com/forum/routing-line-through-speakers_topic48_post204.html#204 Author: doronsh
Subject: 48
Posted: Apr 20 2010 at 1:30pm

The Hi-Phone Maestro IVR model enables the audio to from the headset, handset and 4 lines to/from the PC.

The PWD model enables to switch each of the lines to the headset or handset.

To perform the required operation in a simple way, the PWD model is required.

The Hi-Phone Maestro IVR model can be upgraded to PWD model

]]> Tue, 20 Apr 2010 13:30:18 +0000 http://www.way2call.com/forum/routing-line-through-speakers_topic48_post204.html#204 Routing line through speakers : I have the ivr. http://www.way2call.com/forum/routing-line-through-speakers_topic48_post203.html#203 Author: mattj
Subject: 48
Posted: Apr 20 2010 at 1:04pm

I have the ivr.]]> Tue, 20 Apr 2010 13:04:30 +0000 http://www.way2call.com/forum/routing-line-through-speakers_topic48_post203.html#203 Routing line through speakers : What is your Hi-Phone Maestro... http://www.way2call.com/forum/routing-line-through-speakers_topic48_post202.html#202 Author: doronsh
Subject: 48
Posted: Apr 20 2010 at 12:51pm

What is your Hi-Phone Maestro model (IVR, PWD or PWC)?

]]> Tue, 20 Apr 2010 12:51:09 +0000 http://www.way2call.com/forum/routing-line-through-speakers_topic48_post202.html#202 Routing line through speakers : I'de like to be able to monitor... http://www.way2call.com/forum/routing-line-through-speakers_topic48_post201.html#201 Author: mattj
Subject: 48
Posted: Apr 20 2010 at 12:47pm

I'de like to be able to monitor the call through the speakers by any means possible in real time. ]]> Tue, 20 Apr 2010 12:47:57 +0000 http://www.way2call.com/forum/routing-line-through-speakers_topic48_post201.html#201 Routing line through speakers : The Hi-Phone Maestro has a variety... http://www.way2call.com/forum/routing-line-through-speakers_topic48_post200.html#200 Author: doronsh
Subject: 48
Posted: Apr 20 2010 at 12:31pm

The Hi-Phone Maestro has a variety of audio paths, which are s/w dependable.

Some of the audio paths are related to the device model (e.g Phone or headset to the Line may be enable in the Maestro PWD and PWC model, but not in the IVR model).

See the Maestro product page for more details. www.way2call.com >>> Maestro

What exactly you are expecting to hear?

What is your Hi-Phone Maestro model (IVR, PWD or PWC)?

]]> Tue, 20 Apr 2010 12:31:24 +0000 http://www.way2call.com/forum/routing-line-through-speakers_topic48_post200.html#200 Routing line through speakers : I've plugged a set of speakers... http://www.way2call.com/forum/routing-line-through-speakers_topic48_post199.html#199 Author: mattj
Subject: 48
Posted: Apr 20 2010 at 12:06pm

I've plugged a set of speakers in the back of my maestro and I don't hear anything. Am I suppose to do anything else?]]> Tue, 20 Apr 2010 12:06:54 +0000 http://www.way2call.com/forum/routing-line-through-speakers_topic48_post199.html#199 Routing line through speakers : The Hi-Phone Desktop Lite is a... http://www.way2call.com/forum/routing-line-through-speakers_topic48_post147.html#147 Author: doronsh
Subject: 48
Posted: Feb 15 2010 at 8:07pm

The Hi-Phone Desktop Lite is a telephony device and not using the Voice modem drivers. It has full duplex voice capabilities, and supplies all the required signals and waves for applications development.

There is no one command to switch the audio to the PC’s speaker. This command is a modem specific.

One way is to take the audio from the Hi-Phone input and route it to the PC’s speaker (wave to wave).

More simple solution is to plug the speaker to the Hi-Phone’s speaker out jack, and hear the Line.

The Hi-Phone has few switching modes, which define the way the audio flows.

In order to get the Line audio in the handset, or headset you should choose the right switching mode.

Switching mode description and commands can be found in the SDK .net help file.

CWay2callDriver.CDevice.SwitchingModes Enumeration

Choose: Line_PcAudio_Phone mode.

Use the headset switch

This will route the audio to the PC,  Line and handset together.

In order to use the headset, the headset should be chosen. (handset or headset can be used, but not together)

In order to choose between the handset and headset use the CWay2callDriver.CDevice.LOCAL_DEVICE

]]> Mon, 15 Feb 2010 20:07:05 +0000 http://www.way2call.com/forum/routing-line-through-speakers_topic48_post147.html#147 Routing line through speakers : I am writing an AAC (augmentative... http://www.way2call.com/forum/routing-line-through-speakers_topic48_post146.html#146 Author: ZenArcher
Subject: 48
Posted: Feb 15 2010 at 5:58pm

I am writing an AAC (augmentative and alternative communication) package which is available at ALSMatters.org. I am attempting to add a telephone interface. By that I mean the ability to send synthesized speech on demand and listen to incoming speech through the computer speakers.

I have accomplished this using a cheap voice modem and TAPI 3.1 using Julmar's ITAPI wrapper using C# however due to the half duplex issues the lag between generating and sending speech and switching back to listening makes it unusable.

For testing I have developed the same application using the Way2Call USB Lite and the .Net SDK. I am able to send text via a wav file but I am unable to hear the speaker (ie handset with no earpiece).

In Tapi I use:
TTerminal _speakerTerminal = address.GetDefaultStaticTerminal(TAPIMEDIATYPES.AUDIO, TERMINAL_DIRECTION.TD_RENDER);
and all incoming sound is routed through my speakers (default audio). What is the equivalent in the .Net SDK?

Way2call Drivers Information:

Package Version: 2.01.11 64bit (beta)

OS version: 6.1.7600 

Device Information:

1. Hi-Phone Desktop Lite 019224
    Firmware Version: 5.03.23
    P/N: HD00LTGR01
    S/N: 1028-07-019224
 

Software Components:

File: ScTsp64.tsp
    Description: Way2call Multiple Hi-Phone Devices TSP
    Version: 2.01.11
    Build: 0

File: scwiz32.exe
    Description: Way2Call Multiple Hi-Phone Devices PBX Wizard
    Version: 2.00.34
    Build: 0

File: TestWiz.exe
    Description: Way2call Multiple Hi-Phone Devices Test Wizard
    Version: 2.00.34
    Build: 0

File: w2cMdSound.exe
    Description: Way2call Multiple Devices As Sound Cards
    Version: 1.0.0.7
    Build: 0

File: w2cTspSetup64.exe
    Description: Way2call TAPI Setup
    Version: 1.0.0.2
    Build: 0

File: ml_setup.exe
    Description: Way2call Multiple Hi-Phone Devices Drivers installer
    Version: 2.0.0.43
    Build: b001

File: w2cMultiInfo64.exe
    Description: Way2call drivers infromation
    Version: 1.0.0.4
    Build: 0

File: w2cUSBM.dll
    Description: Way2call Multiple Hi-Phone Devices DLL
    Version: 1.3.7.0
    Build: b004

File: w2cUSBM64.dll
    Description: Way2call Multiple Hi-Phone Devices DLL
    Version: 1.3.7.0
    Build: b002


Audio IN devices:
  0. Microphone (Hi-Phone Desktop Li
  1. Modem #0 Line Record
  2. Digital Audio Interface (Hi-Pho

Audio OUT devices:
  0. Speakers (2- High Definition Au
  1. Modem #0 Line Playback
  2. Digital Audio (S/PDIF) (2- High
  3. Speakers (Hi-Phone Desktop Lite

]]> Mon, 15 Feb 2010 17:58:49 +0000 http://www.way2call.com/forum/routing-line-through-speakers_topic48_post146.html#146 Routing line through speakers : Please send more information about... http://www.way2call.com/forum/routing-line-through-speakers_topic48_post145.html#145 Author: doronsh
Subject: 48
Posted: Feb 15 2010 at 5:16pm

Please send more information about the way2call device that you are using, include part number and s/n.

You can find this information at start menu >>> programs >>> way2call Multiple Hi-Phone devices >> way2call drivers information

Also, are you using off the shelf TAPI application, or one of the Hi-Phone SDK’s API?

]]> Mon, 15 Feb 2010 17:16:51 +0000 http://www.way2call.com/forum/routing-line-through-speakers_topic48_post145.html#145 Routing line through speakers : I can’t understand what exactly... http://www.way2call.com/forum/routing-line-through-speakers_topic48_post144.html#144 Author: Steve
Subject: 48
Posted: Feb 15 2010 at 5:01pm

I can’t understand what exactly you are trying to do, I’m using the way2call products for few years and I’m sure that everything you can do with a TAPI and a Modem you can do with the Hi-Phone devices as well, and with better audio quality.

Can you explain in more details what you are trying to do step by step?

]]> Mon, 15 Feb 2010 17:01:41 +0000 http://www.way2call.com/forum/routing-line-through-speakers_topic48_post144.html#144 Routing line through speakers : Even utilizing the test application... http://www.way2call.com/forum/routing-line-through-speakers_topic48_post143.html#143 Author: ZenArcher
Subject: 48
Posted: Feb 15 2010 at 2:13pm

Even utilizing the test application I am unable to hear incoming voice unless I record it then play it back. I can accomplish that with TAPI and a $19 voice modem.

I purchased this modem for the full duplex capabilities to be used in an AAC application. Outgoing text is a wav generated by a text to speech engine. I now simply wish to route the line to the speakers so that I can hear the other party. If that is not possible please let me know so that I can return the unit.
]]> Mon, 15 Feb 2010 14:13:03 +0000 http://www.way2call.com/forum/routing-line-through-speakers_topic48_post143.html#143 Routing line through speakers : You should write a small application... http://www.way2call.com/forum/routing-line-through-speakers_topic48_post142.html#142 Author: Steve
Subject: 48
Posted: Feb 15 2010 at 9:27am

You should write a small application that uses the PC wave devices.

Route the Hi-Phone line wave file (Hi-Phone recording device) To the speaker (Sound card Playback device)

]]> Mon, 15 Feb 2010 09:27:42 +0000 http://www.way2call.com/forum/routing-line-through-speakers_topic48_post142.html#142 Routing line through speakers : How do I route the line through... http://www.way2call.com/forum/routing-line-through-speakers_topic48_post141.html#141 Author: ZenArcher
Subject: 48
Posted: Feb 13 2010 at 10:25pm

How do I route the line through the computer speakers without using a 3.5mm plug?]]> Sat, 13 Feb 2010 22:25:11 +0000 http://www.way2call.com/forum/routing-line-through-speakers_topic48_post141.html#141