Way2call telephony device discussion forum : Hi-Phone and TAPI http://www.way2call.com/forum/ This is an XML content feed of; Way2call telephony device discussion forum : Hi-Phone and TAPI : Last 100 Posts Sat, 11 Apr 2026 04:11:05 +0000 Thu, 30 Oct 2014 01:14:24 +0000 http://blogs.law.harvard.edu/tech/rss Web Wiz Forums 10.14 60 www.way2call.com/forum/RSS_topic_feed.asp?FID=1 Way2call telephony device discussion forum http://www.way2call.com/forum/forum_images/way2call_logo.jpg http://www.way2call.com/forum/ Hi-Phone and TAPI : Answering of phone calls with HiPhone modem http://www.way2call.com/forum/answering-of-phone-calls-with-hiphone-modem_topic264_post661.html#661 Author: kgottumukkala
Subject: Answering of phone calls with HiPhone modem
Posted: Oct 30 2014 at 1:14am

Thanks Mike.

I am trying to get in touch with Way2Call support team. Lets see if it helps.


]]> Thu, 30 Oct 2014 01:14:24 +0000 http://www.way2call.com/forum/answering-of-phone-calls-with-hiphone-modem_topic264_post661.html#661 Hi-Phone and TAPI : Answering of phone calls with HiPhone modem http://www.way2call.com/forum/answering-of-phone-calls-with-hiphone-modem_topic264_post660.html#660 Author: eljainc
Subject: Answering of phone calls with HiPhone modem
Posted: Oct 24 2014 at 6:54am

Kiran,

I was never able to get the HiPhone to work correctly. I tried other, less costly devices which worked a little bit better than the HiPhone. The problem that I had with them is they did not have reliable call answering/tracking. I had to insert a delay and never knew for sure if a person answered at the other end.

Mike
]]> Fri, 24 Oct 2014 06:54:07 +0000 http://www.way2call.com/forum/answering-of-phone-calls-with-hiphone-modem_topic264_post660.html#660 Hi-Phone and TAPI : Answering of phone calls with HiPhone modem http://www.way2call.com/forum/answering-of-phone-calls-with-hiphone-modem_topic264_post659.html#659 Author: kgottumukkala
Subject: Answering of phone calls with HiPhone modem
Posted: Oct 24 2014 at 6:44am

Hi Mike,

I'm facing the same situation. Did you find any solution? 

Thanks,
Kiran.
]]> Fri, 24 Oct 2014 06:44:32 +0000 http://www.way2call.com/forum/answering-of-phone-calls-with-hiphone-modem_topic264_post659.html#659 Hi-Phone and TAPI : Answering of phone calls with HiPhone modem http://www.way2call.com/forum/answering-of-phone-calls-with-hiphone-modem_topic264_post653.html#653 Author: eljainc
Subject: Answering of phone calls with HiPhone modem
Posted: Nov 20 2013 at 1:58pm

Hello,

I have not had good results with the Hiphone USB modem/TAPI device.  The TAPI settings do not
allow for answered calls to be handled that the connection is established when someone picks up the other
phone line. Can anybody tell me the best settings to use in the TAPI setup so that that this occurs properly?

Thanks
Mike

]]> Wed, 20 Nov 2013 13:58:53 +0000 http://www.way2call.com/forum/answering-of-phone-calls-with-hiphone-modem_topic264_post653.html#653 Hi-Phone and TAPI : Call using Way2Call USB never answered http://www.way2call.com/forum/call-using-way2call-usb-never-answered_topic263_post652.html#652 Author: eljainc
Subject: Call using Way2Call USB never answered
Posted: Nov 07 2013 at 7:10pm

Hello,

I have a simple TAPI telephony application which uses a 3rd party library (AddTAPI).  I have
used other TAPI devices with no problems. My program will dial a phone number and then
when the call is answered, it will play a WAV file or text to speech.

However, when I use the Way2Call USB TAPI device, the call rings the other phone. When
I answer it, nothing happens. Are there some settings which will enable all TAPI functions
for the Way2Call device so that it works properly?

Thanks
Mike

]]> Thu, 07 Nov 2013 19:10:41 +0000 http://www.way2call.com/forum/call-using-way2call-usb-never-answered_topic263_post652.html#652 Hi-Phone and TAPI : How to reliably detect "hello"? http://www.way2call.com/forum/how-to-reliably-detect-hello_topic261_post650.html#650 Author: johncody
Subject: How to reliably detect "hello"?
Posted: Sep 17 2013 at 11:59am

I have TWO hiphone desktop lite modems that I can NOT get to reliably detect voice no matter what thresholds I set in the TAPI Setup app.

I also downloaded your SDK and used your "w2cMultiTestApp.exe" app so I could see in real-time the detection of "Voice Detected" in the event listbox while I adjusted the thresholds.

I would get it to detect me saying "hello" twice in a row with no problem, then for THREE more times it WONT detect me saying "hello" even though I didn't adjust the settings and I am still on the same call as I was for the first two successful "hello"s!
 
So what is wrong that I can not reliably detect "hello"?
]]> Tue, 17 Sep 2013 11:59:54 +0000 http://www.way2call.com/forum/how-to-reliably-detect-hello_topic261_post650.html#650 Hi-Phone and TAPI : Hi-Phone USB no MWI in Win764 http://www.way2call.com/forum/hiphone-usb-no-mwi-in-win764_topic196_post506.html#506 Author: Guests
Subject: Hi-Phone USB no MWI in Win764
Posted: Nov 19 2011 at 8:31pm

Have been using w2c with Homeseer for years.  Recently, I switched from XP to Win7 64 bit.
 
All is working fine, except for the message light.  In XP, with the single mode driver, all is fine.  I can turn the light on and off by issuing
&hsp.HIPSetCallWaitingLED(1,False)
 
But on my Win7 machine with the newer w2c drivers, nothing.
Same versions of HS on both machines, so it must be the drivers.
 
Does anyone have a fix?
]]> Sat, 19 Nov 2011 20:31:48 +0000 http://www.way2call.com/forum/hiphone-usb-no-mwi-in-win764_topic196_post506.html#506 Hi-Phone and TAPI : Hi-Phone UK Settings http://www.way2call.com/forum/hiphone-uk-settings_topic125_post502.html#502 Author: Daabe
Subject: Hi-Phone UK Settings
Posted: Oct 28 2011 at 3:44am

Since your line doesnt support loop current drop, which is being used for this event, Please consult with Homeseer what would be the solution....]]> Fri, 28 Oct 2011 03:44:09 +0000 http://www.way2call.com/forum/hiphone-uk-settings_topic125_post502.html#502 Hi-Phone and TAPI : Hi-Phone and DTMF http://www.way2call.com/forum/hiphone-and-dtmf_topic170_post438.html#438 Author: doronsh
Subject: Hi-Phone and DTMF
Posted: Aug 21 2011 at 9:10pm

The Hi-Phone Desktop Pro would be the best solution.
It can generate DTMF to the Line or to the local Handset
More information you can find at the Hi-Phone SDK.
]]> Sun, 21 Aug 2011 21:10:58 +0000 http://www.way2call.com/forum/hiphone-and-dtmf_topic170_post438.html#438 Hi-Phone and TAPI : Hi-Phone and DTMF http://www.way2call.com/forum/hiphone-and-dtmf_topic170_post400.html#400 Author: Maddy.Malku
Subject: Hi-Phone and DTMF
Posted: Jul 18 2011 at 8:12am

Hi,
 
I want to generate DTMF using TAPI, does Hi-Phone suuport this?
 
If yes, then which one I should use? Hi-Phone Pro or Hi-Phone Lite?
 
Thanks for answering.
 
Regards,
Maddy
]]> Mon, 18 Jul 2011 08:12:14 +0000 http://www.way2call.com/forum/hiphone-and-dtmf_topic170_post400.html#400 Hi-Phone and TAPI : Hi-Phone UK Settings http://www.way2call.com/forum/hiphone-uk-settings_topic125_post371.html#371 Author: doronsh
Subject: Hi-Phone UK Settings
Posted: May 20 2011 at 8:26am

The forum is not for support. It is mainly for discussions.
For 24x7 support please send an email to support@way2call.com
Homeseer doesnt even use the same Hi-Phone DLL that you are trying to test with the test application.
Even if it would work for you with the test application, it wont work for Homeseer.
 
]]> Fri, 20 May 2011 08:26:14 +0000 http://www.way2call.com/forum/hiphone-uk-settings_topic125_post371.html#371 Hi-Phone and TAPI : Hi-Phone UK Settings http://www.way2call.com/forum/hiphone-uk-settings_topic125_post370.html#370 Author: Hopkirk
Subject: Hi-Phone UK Settings
Posted: May 20 2011 at 8:04am

I see the normal lack of service has been resumed..........]]> Fri, 20 May 2011 08:04:16 +0000 http://www.way2call.com/forum/hiphone-uk-settings_topic125_post370.html#370 Hi-Phone and TAPI : PC telephony solution http://www.way2call.com/forum/pc-telephony-solution_topic135_post358.html#358 Author: BR99
Subject: PC telephony solution
Posted: May 13 2011 at 12:49am

Hi

 

I'm looking for a PC telephony solution that

 

1. report to my s/w application, land-line events (ring, busy, silence, hangup, etc.)

2. report to my s/w application, my (desktop) analog phone events (handset up/down etc.)

3. support XP SP3 OS, VBA (2007) programming environment

4. FAX Tx/Rx

5. optional: recording & Voip
 
i'm not familiar with Way2Call products so any suggestion is welcomed 
is Hi-Phone Desktop USB a good choice (address my listed requirements) ?
Thanks 
]]> Fri, 13 May 2011 00:49:51 +0000 http://www.way2call.com/forum/pc-telephony-solution_topic135_post358.html#358 Hi-Phone and TAPI : Hi-Phone UK Settings http://www.way2call.com/forum/hiphone-uk-settings_topic125_post353.html#353 Author: Hopkirk
Subject: Hi-Phone UK Settings
Posted: May 11 2011 at 7:10am

Hi

 
I have been carrying out more testing with the Hi-Phone and my POTS line. I can confirm I do see CPC and a 400Hz tone when a calling party clears down on my line. However the Hi-Phones doesn't see these events via the Way2Call test application. What duration of CPC does the Way2Call look for to detect the current change? Is this setting configurable or is it setup within the API, in my case by HomeSeer?
 
I can't find any documentation on controlling the Hi-Phone so any pointers would be appreciated!
 
Thanks
]]> Wed, 11 May 2011 07:10:22 +0000 http://www.way2call.com/forum/hiphone-uk-settings_topic125_post353.html#353 Hi-Phone and TAPI : Hi-Phone UK Settings http://www.way2call.com/forum/hiphone-uk-settings_topic125_post352.html#352 Author: Hopkirk
Subject: Hi-Phone UK Settings
Posted: May 11 2011 at 3:25am

Hi

I forgot to say, my Hi-Phone is new and is running firmware 4.03.36, which is what the unit was shipped with and appears to be the latest firmware verison.

Thanks
]]> Wed, 11 May 2011 03:25:05 +0000 http://www.way2call.com/forum/hiphone-uk-settings_topic125_post352.html#352 Hi-Phone and TAPI : Hi-Phone UK Settings http://www.way2call.com/forum/hiphone-uk-settings_topic125_post351.html#351 Author: Hopkirk
Subject: Hi-Phone UK Settings
Posted: May 11 2011 at 3:02am

Hi
 
Thanks for your response. I didn't realize that HomeSeer doesn't use TAPI, that's interesting.
 
If I use the Way2Call test application, with a clean boot and HomeSeer not running I would expect the Hi-Phone to pickup a terminated call by looking for a 400Hz continuous tone or current drop. I can see this tone being generated by the PSTN on the test application's 'spectrum analyser' when a call he been cleared down by the remote party. I've checked British Telecom's SIN on the tone that is generated when a remote party clears down and it is 2.5 seconds of 400 Hz, which I've set on the Way2call's test application. This is also set in the 'international settings' on the Way2Call software. I am unable to do this however and, using the test application, as the Hi-Phone will keep the line open with no events being displayed in the call monitor apart from speech detected. I would assume that the Way2Call would display the events of a call being dropped in this window? As a first step in resolving this issue I'd like to make the Hi-Phone detected a clear down so I can then tackle the issue of HomeSeer picking this event up.
 
Thanks
 
Andy
]]> Wed, 11 May 2011 03:02:20 +0000 http://www.way2call.com/forum/hiphone-uk-settings_topic125_post351.html#351 Hi-Phone and TAPI : Hi-Phone UK Settings http://www.way2call.com/forum/hiphone-uk-settings_topic125_post350.html#350 Author: doronsh
Subject: Hi-Phone UK Settings
Posted: May 10 2011 at 7:04pm

The Homeseer doesnt use the TAPI setup, and thefore any changes at the TAPI setup doesnt affect the Homeseer.
Since your line doesnt support loop current drop, which is being used for this event, Please consult with Homeseer what would be the solution
]]> Tue, 10 May 2011 19:04:36 +0000 http://www.way2call.com/forum/hiphone-uk-settings_topic125_post350.html#350 Hi-Phone and TAPI : Hi-Phone UK Settings http://www.way2call.com/forum/hiphone-uk-settings_topic125_post349.html#349 Author: Hopkirk
Subject: Hi-Phone UK Settings
Posted: May 10 2011 at 3:54pm

Come on guys, your website says I'm to come to the forum for support but I've not had any response to my fault above and it looks like I'm not the only one with unanswered questions.......]]> Tue, 10 May 2011 15:54:33 +0000 http://www.way2call.com/forum/hiphone-uk-settings_topic125_post349.html#349 Hi-Phone and TAPI : Analog phone/line events http://www.way2call.com/forum/analog-phone-line-events_topic129_post347.html#347 Author: BR99
Subject: Analog phone/line events
Posted: May 08 2011 at 5:02am

Hi

I'm looking for a solution that will enable me to

1. Get events of my phone (Handset up/down; dialed no.; etc.)
2. Get Line (Analog) events (busy; ringing; etc.)
3. XP VBA library
4. Support for FAX

As you realize i'm novice ... any support and suggestions are appreciated

Thanks

]]> Sun, 08 May 2011 05:02:39 +0000 http://www.way2call.com/forum/analog-phone-line-events_topic129_post347.html#347 Hi-Phone and TAPI : Hi-Phone UK Settings http://www.way2call.com/forum/hiphone-uk-settings_topic125_post346.html#346 Author: Hopkirk
Subject: Hi-Phone UK Settings
Posted: May 08 2011 at 3:22am

Hi
 
Do Way2Call check this forum? I've not heard anything about this fault yet.
 
Thanks
]]> Sun, 08 May 2011 03:22:34 +0000 http://www.way2call.com/forum/hiphone-uk-settings_topic125_post346.html#346 Hi-Phone and TAPI : Hi-Phone UK Settings http://www.way2call.com/forum/hiphone-uk-settings_topic125_post342.html#342 Author: Hopkirk
Subject: Hi-Phone UK Settings
Posted: May 05 2011 at 9:09am

Hi
 
I have a newly purchased Way2Call USB Hi-Phone attached to a Windows XP SP3 PC and also attached to a standard UK BT POTS phone line. I want to use the Hi-Phone with HomeSeer 2. I have the latest drivers from your website installed and the Hi-Phone worked ok with HomeSeer for a few days. However I noticed that if someone left me a voicemail message that HomeSeer kept recording for a couple of minutes, even if the calling party had hung up. I installed the Way2Call test application to see what was happening. When I dial the Hi-Phone and hang up the test application shows this in the log:
 
SIT detected - no circuit found.
 
In the UK international tone settings this makes sense as a continuous 400Hz tone is shown to be the "no circuit found". I ensured that the Hi-Phone in TAPI setup was configured to use the FastBusy/re-order tone to disconnect. I tried to change the re-order tone to listen instead for a 400Hz continual tone but this didn't work. The Hi-Phone is also configured to look at line current to detect the line's status but this doesn't work either. In the international tone settings I changed the SIT detected tone to 4000Hz (to remove it from service) and then added a new item to the congestion tone with 400Hz on, 2500 duration to try and tell the Hi-Phone that this tone means disconnect. This change had the effect of stopping "SIT Detected" being displayed in the test application but now now call progress messages are displayed. How can I make the Hi-Phone understand when the calling party has cleared down?
 
The Way2Call test application crashed once during use and this created another issue in that I couldn't open the Way2Call TAPI setup screen any more. I've tried rebooting the PC but if I click on the TAPI setup icon I receive a few seconds of hour glass and then nothing happens.
I've tried removing and re-installing the Hi-Phone drivers, rebooting the PC and powering the PC and Hi-Phone off for several minutes before booting again but the same thing happens. I assumed this problem was caused by the running application crashing while the TAPI setup screen was open and the TAPI application had a lock somewhere. I thought that when the app was re-started it thought it was already running and shutdown. I think I've fixed this by changing the registry key hkey_local_machine\software\Way2call\w2cusbdll\globals\DoingSetup from 1 to a 0. This now allows me to start TAPI setup. Can you let me know if there is anything else I need to change to recover from the software crash I had?
 
 
Thanks
 
Andy.
]]> Thu, 05 May 2011 09:09:07 +0000 http://www.way2call.com/forum/hiphone-uk-settings_topic125_post342.html#342 Hi-Phone and TAPI : Determine between voicemail and pickup? http://www.way2call.com/forum/determine-between-voicemail-and-pickup_topic81_post273.html#273 Author: Mogo
Subject: Determine between voicemail and pickup?
Posted: Oct 27 2010 at 10:37am

I have Hi-Phone Desktop lite. I am having a hard time trying to get it determine if the phone was picked up by a human or if it went to voicemail/answering machine. I see that there is an option for voice mail frequency setup. Does that mean it has to be setup for every single voicemail tone. Is there an easier way? Is there somewhere I can look to get voicemail frequency? I just need help determine if the call went to voice mail or it was actually picked up.

 
Thanks
Mogo
]]> Wed, 27 Oct 2010 10:37:48 +0000 http://www.way2call.com/forum/determine-between-voicemail-and-pickup_topic81_post273.html#273 Hi-Phone and TAPI : VOIP application http://www.way2call.com/forum/voip-application_topic73_post253.html#253 Author: queacct
Subject: VOIP application
Posted: Sep 28 2010 at 3:11pm

Thanks for the response
we did find a service and a third party developer (ocx) that we have been working with.
Telephony is tough
We need to know when a machine answers vs a person and how quickly we can force a hangup
 
]]> Tue, 28 Sep 2010 15:11:34 +0000 http://www.way2call.com/forum/voip-application_topic73_post253.html#253 Hi-Phone and TAPI : VOIP application http://www.way2call.com/forum/voip-application_topic73_post252.html#252 Author: doronsh
Subject: VOIP application
Posted: Sep 28 2010 at 1:59pm

did you find a solution?

]]> Tue, 28 Sep 2010 13:59:29 +0000 http://www.way2call.com/forum/voip-application_topic73_post252.html#252 Hi-Phone and TAPI : VOIP application http://www.way2call.com/forum/voip-application_topic73_post247.html#247 Author: queacct
Subject: VOIP application
Posted: Sep 16 2010 at 10:39am

Hello
We need to create a call system that needs to call several phone numbers ASAP
Can I do this with Voip? What tools do I need. Are there apps out there already?
 
Thanks!!1
]]> Thu, 16 Sep 2010 10:39:04 +0000 http://www.way2call.com/forum/voip-application_topic73_post247.html#247 Hi-Phone and TAPI : Doesn't register/invoke call state properly http://www.way2call.com/forum/doesnt-register-invoke-call-state-properly_topic72_post244.html#244 Author: nexusmedia
Subject: Doesn't register/invoke call state properly
Posted: Aug 23 2010 at 2:46am

And also how to control the volume of the speaker from the modem. I can hear a low-volume voice from the modem. The other end can hear me clearly.]]> Mon, 23 Aug 2010 02:46:48 +0000 http://www.way2call.com/forum/doesnt-register-invoke-call-state-properly_topic72_post244.html#244 Hi-Phone and TAPI : Doesn't register/invoke call state properly http://www.way2call.com/forum/doesnt-register-invoke-call-state-properly_topic72_post243.html#243 Author: nexusmedia
Subject: Doesn't register/invoke call state properly
Posted: Aug 23 2010 at 1:33am

Hi, I've a Way2Call HiPhone-desktop Pro HD00PRGR01 and using it on Win XP SP3.

I've problems with call states doesn't register or invoke properly in TAPI. Here are the list of states that I can't get it to work or partially work.

TAPI doesn't shoot LINECALLSTATE_DISCONNECTED when call ended by either party.

TAPI doesn't shoot LINECALLSTATE_CONNECTED unless the other party speaks 1st.

Need some help for this issue. Thanks.
]]> Mon, 23 Aug 2010 01:33:31 +0000 http://www.way2call.com/forum/doesnt-register-invoke-call-state-properly_topic72_post243.html#243 Hi-Phone and TAPI : Hi-Phone,TAPI, and Mic/Speaker http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post242.html#242 Author: doronsh
Subject: Hi-Phone,TAPI, and Mic/Speaker
Posted: Aug 11 2010 at 4:54pm

Please use the way2call test application to verify that your PC Computer Headset to Phone Adapter - Dual 3.5mm to 2.5mm is working fine.

It can be downloaded from www.way2call.com  >>> developers

 

]]> Wed, 11 Aug 2010 16:54:22 +0000 http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post242.html#242 Hi-Phone and TAPI : Hi-Phone,TAPI, and Mic/Speaker http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post241.html#241 Author: nexusmedia
Subject: Hi-Phone,TAPI, and Mic/Speaker
Posted: Aug 08 2010 at 11:02pm

Hi,

Right now, I'm using a Y splitter cable, 2.5mm male to a speaker and mic female 3.5mm Y splitter. Still can't produce any sound using the sample program(C++) or the diagnostic app.

I'll attach the driver information and the audio and voice settings from control panel.








http://images.syedhusain.net/way2call/HD00PRGR01_driverInfo.txt]]> Sun, 08 Aug 2010 23:02:22 +0000 http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post241.html#241 Hi-Phone and TAPI : Hi-Phone,TAPI, and Mic/Speaker http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post238.html#238 Author: doronsh
Subject: Hi-Phone,TAPI, and Mic/Speaker
Posted: Jul 21 2010 at 9:22am

I don't think so,...
Try the 3.5mm (Mic and speaker) to 2.5mm Headset cable converter]]> Wed, 21 Jul 2010 09:22:32 +0000 http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post238.html#238 Hi-Phone and TAPI : Hi-Phone,TAPI, and Mic/Speaker http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post237.html#237 Author: nexusmedia
Subject: Hi-Phone,TAPI, and Mic/Speaker
Posted: Jul 20 2010 at 8:42pm

Ah, 1 more thing. The Y adapter is a generic splitter. Is it doable?]]> Tue, 20 Jul 2010 20:42:59 +0000 http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post237.html#237 Hi-Phone and TAPI : Hi-Phone,TAPI, and Mic/Speaker http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post236.html#236 Author: doronsh
Subject: Hi-Phone,TAPI, and Mic/Speaker
Posted: Jul 20 2010 at 7:20am

See the link again,...
 
http://www.amazon.com/Headset-Buddy-Adapter-Smartphone-Blackberry/dp/B00331S5FK/ref=sr_1_4?ie=UTF8&s=electronics&qid=1279627766&sr=8-4
]]> Tue, 20 Jul 2010 07:20:41 +0000 http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post236.html#236 Hi-Phone and TAPI : Hi-Phone,TAPI, and Mic/Speaker http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post235.html#235 Author: doronsh
Subject: Hi-Phone,TAPI, and Mic/Speaker
Posted: Jul 20 2010 at 7:19am

The Hi-Phone Desktop Pro 2.5mm headset connector has Ground, Single Mic in and Single Speaker out.

It seems like the 2.5mm to 3.5mm and the splitter combination that you are using doesn’t perform the required conversion.

I suspect that the Y splitter that you are using probably designed for a Stereo to Mono Mic. And not for headset splitter.

I have never tried it, but I think that this combination would work (See link to Amazon)

 

http://www.amazon.com/Headset-Buddy-Adapter-Smartphone-Blackberry/dp/B00331S5FK/ref=sr_1_4?ie=UTF8&s=electronics&qid=1279627766&sr=8-4

]]> Tue, 20 Jul 2010 07:19:12 +0000 http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post235.html#235 Hi-Phone and TAPI : Hi-Phone,TAPI, and Mic/Speaker http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post234.html#234 Author: nexusmedia
Subject: Hi-Phone,TAPI, and Mic/Speaker
Posted: Jul 19 2010 at 11:03pm

HS2. Basically it's a 2.5mm jack (HS2) to a 3.5mm. Then a Y adapter that takes a single 3.5mm jack and splits it to dual 3.5mm jacks.]]> Mon, 19 Jul 2010 23:03:12 +0000 http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post234.html#234 Hi-Phone and TAPI : Hi-Phone,TAPI, and Mic/Speaker http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post233.html#233 Author: doronsh
Subject: Hi-Phone,TAPI, and Mic/Speaker
Posted: Jul 19 2010 at 10:59pm

Which of the headset jack are you using (HS1 or HS2)?

What kind of splitter are you using?

]]> Mon, 19 Jul 2010 22:59:10 +0000 http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post233.html#233 Hi-Phone and TAPI : Hi-Phone,TAPI, and Mic/Speaker http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post232.html#232 Author: nexusmedia
Subject: Hi-Phone,TAPI, and Mic/Speaker
Posted: Jul 19 2010 at 10:18pm

Hi,

I've acquired a Hi-Phone Desktop Pro. 019731 (HD00PRGR01) F/V:10.03.23

I've a question about the audio/voice. I've plugged a splitter to the headset jack in the modem. The splitter then connected to a speaker and microphone and I set up the TAPI to use headset (via Way2Call TAPI setup) . Also, I've change the PC default audio and voice devices to Hi-Phone desktop pro. Is this a valid setup?

I tried to test the setup using Way2Call Test Wizard. I tested the headset but the app stop at "please plug in the headset" eventhough in the Test log I can see "Headset no. 2 in". If I skip the step and try the recording and playback, I can't hear any sound.

Please advice.
]]> Mon, 19 Jul 2010 22:18:37 +0000 http://www.way2call.com/forum/hiphonetapi-and-mic-speaker_topic71_post232.html#232 Hi-Phone and TAPI : Hi-Phone and LabView http://www.way2call.com/forum/hiphone-and-labview_topic60_post187.html#187 Author: doronsh
Subject: Hi-Phone and LabView
Posted: Apr 01 2010 at 1:28pm

The Hi-Phone SDK include samples can be downlaoded from www.way2call.com >>> developers

Edited by admin - May 15 2013 at 6:41am]]> Thu, 01 Apr 2010 13:28:13 +0000 http://www.way2call.com/forum/hiphone-and-labview_topic60_post187.html#187 Hi-Phone and TAPI : Hi-Phone and LabView http://www.way2call.com/forum/hiphone-and-labview_topic60_post186.html#186 Author: midias
Subject: Hi-Phone and LabView
Posted: Apr 01 2010 at 1:23pm

LabView can also use C.  Do you have C based instruction calls.  Instruction lengths ect.]]> Thu, 01 Apr 2010 13:23:29 +0000 http://www.way2call.com/forum/hiphone-and-labview_topic60_post186.html#186 Hi-Phone and TAPI : Hi-Phone and LabView http://www.way2call.com/forum/hiphone-and-labview_topic60_post185.html#185 Author: midias
Subject: Hi-Phone and LabView
Posted: Apr 01 2010 at 1:15pm

Do you know of any Labview code that has allready been writen?]]> Thu, 01 Apr 2010 13:15:00 +0000 http://www.way2call.com/forum/hiphone-and-labview_topic60_post185.html#185 Hi-Phone and TAPI : Hi-Phone and LabView http://www.way2call.com/forum/hiphone-and-labview_topic60_post184.html#184 Author: doronsh
Subject: Hi-Phone and LabView
Posted: Apr 01 2010 at 12:29pm

If LabView is TAPI compliant, it should be working fine]]> Thu, 01 Apr 2010 12:29:28 +0000 http://www.way2call.com/forum/hiphone-and-labview_topic60_post184.html#184 Hi-Phone and TAPI : Hi-Phone and LabView http://www.way2call.com/forum/hiphone-and-labview_topic60_post183.html#183 Author: midias
Subject: Hi-Phone and LabView
Posted: Apr 01 2010 at 12:08pm

http://www.ni.com/labview/
Labview home page.  Yes it is TAPI compliant.  I would like to be able to control the Hi-Phone device through labview and was wondering if anyone had done it yet.
]]> Thu, 01 Apr 2010 12:08:16 +0000 http://www.way2call.com/forum/hiphone-and-labview_topic60_post183.html#183 Hi-Phone and TAPI : Hi-Phone and LabView http://www.way2call.com/forum/hiphone-and-labview_topic60_post182.html#182 Author: doronsh
Subject: Hi-Phone and LabView
Posted: Apr 01 2010 at 11:36am

Can you please share the link to LabView web site?

Is it TAPI compliant?

]]> Thu, 01 Apr 2010 11:36:29 +0000 http://www.way2call.com/forum/hiphone-and-labview_topic60_post182.html#182 Hi-Phone and TAPI : Hi-Phone and LabView http://www.way2call.com/forum/hiphone-and-labview_topic60_post181.html#181 Author: midias
Subject: Hi-Phone and LabView
Posted: Apr 01 2010 at 11:29am

Does anyone have labview drivers that will work with the Hi-Phone desktop USB model?]]> Thu, 01 Apr 2010 11:29:53 +0000 http://www.way2call.com/forum/hiphone-and-labview_topic60_post181.html#181 Hi-Phone and TAPI : Hi-Phone User Manual http://www.way2call.com/forum/hiphone-user-manual_topic56_post170.html#170 Author: Roberto_Frl
Subject: Hi-Phone User Manual
Posted: Mar 11 2010 at 11:57am

Using mine (based on windows tapi) and also your application test (w2cMultiTestApp.exe), If I don't answer a call (and a leave to ring the phone), after 10-15 second I recive a Connect event. Looking within web site I found a post that seem to solve this problem --> ....  tune-up Voice Detect Threshold value (from OCX perspective changing VoiceDetectionThershold property or by Way2call TAPI Setup changing Voice Detect Threshold in advanced setting).
Please explain wich rule/method we have to use to discover the best value in order to avoid 
connected event


Best regard
]]> Thu, 11 Mar 2010 11:57:15 +0000 http://www.way2call.com/forum/hiphone-user-manual_topic56_post170.html#170 Hi-Phone and TAPI : CS_CONNECTED arrives when a person speaks http://www.way2call.com/forum/cs-connected-arrives-when-a-person-speaks_topic54_post169.html#169 Author: Roberto_Frl
Subject: CS_CONNECTED arrives when a person speaks
Posted: Mar 11 2010 at 11:50am

Thank you and OK, but I have unchecked the voice threshold set in the advanced window and the modem has worked like before sending CS_CONNECTED when a person start to speak]]> Thu, 11 Mar 2010 11:50:05 +0000 http://www.way2call.com/forum/cs-connected-arrives-when-a-person-speaks_topic54_post169.html#169 Hi-Phone and TAPI : CS_CONNECTED arrives when a person speaks http://www.way2call.com/forum/cs-connected-arrives-when-a-person-speaks_topic54_post168.html#168 Author: doronsh
Subject: CS_CONNECTED arrives when a person speaks
Posted: Mar 11 2010 at 10:34am

You can find the Hi-Phone TAPI setup at start menu >>> programs >>> Way2call multiple Hi-Phone devices >>> TAPI setup

You can define the connect and disconnect options

]]> Thu, 11 Mar 2010 10:34:32 +0000 http://www.way2call.com/forum/cs-connected-arrives-when-a-person-speaks_topic54_post168.html#168 Hi-Phone and TAPI : Hi-Phone User Manual http://www.way2call.com/forum/hiphone-user-manual_topic56_post167.html#167 Author: doronsh
Subject: Hi-Phone User Manual
Posted: Mar 11 2010 at 10:33am

It can be found in the SDK

SDK can be downloaded from the developers’ site

]]> Thu, 11 Mar 2010 10:33:24 +0000 http://www.way2call.com/forum/hiphone-user-manual_topic56_post167.html#167 Hi-Phone and TAPI : Hi-Phone User Manual http://www.way2call.com/forum/hiphone-user-manual_topic56_post166.html#166 Author: Roberto_Frl
Subject: Hi-Phone User Manual
Posted: Mar 11 2010 at 10:03am

Accordin to FAQ section of your web site detailed explanation to decrease Voice Detection Threshold can be found inside the Hi-Phone User Manual.  Where I can found this manual ?
Inside CD Drivers / Web site only short-manual is available.

 
]]> Thu, 11 Mar 2010 10:03:59 +0000 http://www.way2call.com/forum/hiphone-user-manual_topic56_post166.html#166 Hi-Phone and TAPI : CS_CONNECTED arrives when a person speaks http://www.way2call.com/forum/cs-connected-arrives-when-a-person-speaks_topic54_post164.html#164 Author: Roberto_Frl
Subject: CS_CONNECTED arrives when a person speaks
Posted: Mar 05 2010 at 4:40am

CS_CONNECTED TAPI Event arrives to my program when a person start to speak.
Can TAPI Driver send CS_CONNECTED only whe the line is up?
 
Thak you      Confused
]]> Fri, 05 Mar 2010 04:40:12 +0000 http://www.way2call.com/forum/cs-connected-arrives-when-a-person-speaks_topic54_post164.html#164 Hi-Phone and TAPI : Detecting hangup http://www.way2call.com/forum/detecting-hangup_topic38_post116.html#116 Author: doronsh
Subject: Detecting hangup
Posted: Nov 16 2009 at 1:20pm

The Hi-Phone TAPI drivers detects the call disconnect by four ways.

1.       Loop current drop

2.       Disconnect tone

3.       Silence for a define period of time.

4.       Detection of defined tone

From the report you have sent it’s not clear what the scenario is.

To check if it’s an issue with then Hi-Phone, or your application, please download the Hi-Phone test application from www.way2call.com >>> developers

This application presents all the commands and events, as detect by the Hi-Phone.

If you don’t see the loop current drop or disconnect tone detected, please send an email to support@way2call.com and we can check it by login in to your PC.

]]> Mon, 16 Nov 2009 13:20:27 +0000 http://www.way2call.com/forum/detecting-hangup_topic38_post116.html#116 Hi-Phone and TAPI : Detecting hangup http://www.way2call.com/forum/detecting-hangup_topic38_post115.html#115 Author: jconde
Subject: Detecting hangup
Posted: Nov 16 2009 at 11:02am

It's been a couple of weeks again, just wondering if you've had a chance to look into this problem yet. It would be nice if this box could eventually work as it's supposed to.

John
]]> Mon, 16 Nov 2009 11:02:33 +0000 http://www.way2call.com/forum/detecting-hangup_topic38_post115.html#115 Hi-Phone and TAPI : Detecting hangup http://www.way2call.com/forum/detecting-hangup_topic38_post111.html#111 Author: jconde
Subject: Detecting hangup
Posted: Oct 29 2009 at 4:10pm

Thanks for the reply but that is how I've had it setup, as I mentioned in my first message.

I just checked again that the setup was correct, as you specified, and called in. Below is  the log it produced. 201-210 is it picking up the phone and talking to me. 211-212 is me talking and then hanging up. The rest is the device listening to the beeping.

My event handler never detects a TE_CALLSTATE event with a value of CS_DISCONNECTED. I am detecting, and handling, CS_OFFERING and CS_CONNECTED.  Should a CS_DISCONNECTED been sent when it detected the warning tone? Am I listening for the wrong event? Any ideas?

John

 201    16:51:27:687    [1016] » Dev#0 Command: Start Analysis
 202    16:51:27:718    [1228] New PCM Buffer!
 203    16:51:27:734    [1228] New PCM Buffer!
 204    16:51:27:937    [1228] New PCM Buffer!
 205    16:51:28:296    [1228] New PCM Buffer!
 206    16:51:28:687    [1228] New PCM Buffer!
 207    16:51:29:046    [1228] New PCM Buffer!
 208    16:51:29:390    [1228] New PCM Buffer!
 209    16:51:29:750    [1228] New PCM Buffer!
 210    16:51:29:937    [1228] New PCM Buffer!
 211    16:51:32:718    [1016] » Dev#0 Event: Call answered: Voice detected. ExData 0x0000, TID: 0x0204
 212    16:51:32:718    [1016] » Dev#0 Command: Switch: Phone - Audio Stream - Line
 213    16:51:46:343    [1016] » Dev#0 Event: Warning tone detected, Operator Intervening PABX. ExData 0x0000, TID: 0x0204
 214    16:51:47:890    [1016] » Dev#0 Event: Warning tone detected, Operator Intervening PABX. ExData 0x0000, TID: 0x0204
 215    16:51:49:359    [1016] » Dev#0 Event: Warning tone detected, Operator Intervening PABX. ExData 0x0000, TID: 0x0204
 216    16:51:50:890    [1016] » Dev#0 Event: Warning tone detected, Operator Intervening PABX. ExData 0x0000, TID: 0x0204
 217    16:51:52:375    [1016] » Dev#0 Event: Warning tone detected, Operator Intervening PABX. ExData 0x0000, TID: 0x0204
 218    16:51:53:906    [1016] » Dev#0 Event: Warning tone detected, Operator Intervening PABX. ExData 0x0000, TID: 0x0204
 219    16:51:54:984    [1016] » Dev#0 Event: Call answered: Speech detected. ExData 0x0000, TID: 0x0204
 220    16:51:54:984    [1016] » Dev#0 Command: Switch: Phone - Audio Stream - Line
 221    16:51:55:375    [1016] » Dev#0 Event: Warning tone detected, Operator Intervening PABX. ExData 0x0000, TID: 0x0204
 222    16:51:56:406    [1016] » Dev#0 Event: Call answered: Speech detected. ExData 0x0000, TID: 0x0204
 223    16:51:56:406    [1016] » Dev#0 Command: Switch: Phone - Audio Stream - Line
 224    16:51:58:765    [1016] » Dev#0 Event: Call answered: Speech detected. ExData 0x0000, TID: 0x0204
 225    16:51:58:765    [1016] » Dev#0 Command: Switch: Phone - Audio Stream - Line
 226    16:52:01:125    [1016] » Dev#0 Event: Call answered: Speech detected. ExData 0x0000, TID: 0x0204
 227    16:52:01:125    [1016] » Dev#0 Command: Switch: Phone - Audio Stream - Line
 228    16:52:03:500    [1016] » Dev#0 Event: Call answered: Speech detected. ExData 0x0000, TID: 0x0204
 229    16:52:03:500    [1016] » Dev#0 Command: Switch: Phone - Audio Stream - Line

]]> Thu, 29 Oct 2009 16:10:18 +0000 http://www.way2call.com/forum/detecting-hangup_topic38_post111.html#111 Hi-Phone and TAPI : Detecting hangup http://www.way2call.com/forum/detecting-hangup_topic38_post110.html#110 Author: doronsh
Subject: Detecting hangup
Posted: Oct 29 2009 at 11:46am

The wave you have sent is a standard 480,620 Hz .25 second reorder, which should be detected by the Hi-Phone.

When using TAPI applications, you should setup the disconnect tone option.

The default is loop current drop detection.

Please go to start menu >>> programs >>> Way2call multiple Hi-Phone device drivers >>> Way2call TAPI setup

Configure

Advanced

Check the disconnect tone fast busy

OK

OK

Close

The Hi-Phone is setup to detect fast busy as a disconnect tone

]]> Thu, 29 Oct 2009 11:46:41 +0000 http://www.way2call.com/forum/detecting-hangup_topic38_post110.html#110 Hi-Phone and TAPI : Detecting hangup http://www.way2call.com/forum/detecting-hangup_topic38_post109.html#109 Author: jconde
Subject: Detecting hangup
Posted: Oct 29 2009 at 9:05am

I haven't heard from you since I sent you the wav file, has there been any progress on detecting the hangup (reorder) tones?

John
]]> Thu, 29 Oct 2009 09:05:13 +0000 http://www.way2call.com/forum/detecting-hangup_topic38_post109.html#109 Hi-Phone and TAPI : VMware server support http://www.way2call.com/forum/vmware-server-support_topic39_post108.html#108 Author: cooperof
Subject: VMware server support
Posted: Oct 29 2009 at 7:31am

To enable the device in VMware, I had to enable windows audio.

After I went into start > control panel > sounds and audio devices I got a prompt saying audio devices weren't enabled; I click the check box and clicked yes to allow the server to reboot. After it came back up I was able to select and use the audio devices like normal.
]]> Thu, 29 Oct 2009 07:31:13 +0000 http://www.way2call.com/forum/vmware-server-support_topic39_post108.html#108 Hi-Phone and TAPI : VMware server support http://www.way2call.com/forum/vmware-server-support_topic39_post99.html#99 Author: cooperof
Subject: VMware server support
Posted: Oct 21 2009 at 8:56am

I am trying to install the Hi-Phone Desktop on a virtual server (Windows Server 2003) and am unable to get the device to work properly. Is VMware supported by way2call devices? and if so is there any documentation so I can get it setup and working properly. I have tried several different versions of the drivers and had no luck.


]]> Wed, 21 Oct 2009 08:56:54 +0000 http://www.way2call.com/forum/vmware-server-support_topic39_post99.html#99 Hi-Phone and TAPI : Detecting hangup http://www.way2call.com/forum/detecting-hangup_topic38_post97.html#97 Author: doronsh
Subject: Detecting hangup
Posted: Oct 13 2009 at 9:22am

Please email the recorded disconnect tone wave files to support@way2call.com

Make sure it is recorded at 8 kHz 16 bit mono.

You can use the way2call test application for recording

]]> Tue, 13 Oct 2009 09:22:41 +0000 http://www.way2call.com/forum/detecting-hangup_topic38_post97.html#97 Hi-Phone and TAPI : Detecting hangup http://www.way2call.com/forum/detecting-hangup_topic38_post96.html#96 Author: jconde
Subject: Detecting hangup
Posted: Oct 13 2009 at 8:54am

Thanks for the quick reply, unfortunately the beta code seems to have the same problem.  Would it help if I emailed you a wave of the tones I'm getting?

John
]]> Tue, 13 Oct 2009 08:54:03 +0000 http://www.way2call.com/forum/detecting-hangup_topic38_post96.html#96 Hi-Phone and TAPI : Detecting hangup http://www.way2call.com/forum/detecting-hangup_topic38_post95.html#95 Author: doronsh
Subject: Detecting hangup
Posted: Oct 12 2009 at 11:03am

There are some tone detection issues with this TAPI version (2.00.95)

Please try to use the beta drivers from www.way2call.com >>> developers (2.01.02 beta)]]> Mon, 12 Oct 2009 11:03:45 +0000 http://www.way2call.com/forum/detecting-hangup_topic38_post95.html#95 Hi-Phone and TAPI : Detecting hangup http://www.way2call.com/forum/detecting-hangup_topic38_post94.html#94 Author: jconde
Subject: Detecting hangup
Posted: Oct 12 2009 at 10:47am

I'm using a way2call USB box with a C++ program accessing it through TAPI. Everything seems to be working fine except that the user hang-up is never detected. The phone service is through a company called Lingo, the box they provided is a Linksys SPA-2102. It's reorder  tone is 480,620 Hz .25 second on and off. I've actually recorded the beeps and verified this is being produced. I've tried both the "reorder" setting and the custom setting in the TAPI setup but it still never detects the hangup. I've actually watched the log while hanging up to verify it's not just my software missing the event.  I've copied my driver information below in case that helps.

Am I missing something obvious?

John Conde

Way2call Drivers Information:

Package Version: 2.00.95

OS version: 5.1.2600  Service Pack 3

Device Information:

1. Hi-Phone Desktop USB 000872
    Firmware Version: 4.02.33
    P/N: HD00USGR01
    S/N: 1010-07-000872
 

Software Components:

File: w2cUSBM.dll
    Description: Way2call Multiple Hi-Phone Devices DLL
    Version: 1.3.6.9
    Build: b009

File: ScTspML.tsp
    Description: Way2call Multiple Hi-Phone Devices TSP
    Version: 2.00.88
    Build: 0

File: w2cMultiOcx.ocx
    Description: Way2call Multiple Hi-Phone Devices OCX
    Version: 1.0.0.4
    Build: 0

File: TestWiz.exe
    Description: Way2Call Multiple Hi-Phone Devices Test Wizard
    Version: 2.00.34
    Build: 0

File: w2cMdSound.exe
    Description: Way2call Multiple Devices As Sound Cards
    Version: 1.0.0.7
    Build: 0

File: scwiz32.exe
    Description: Way2Call Multiple Hi-Phone Devices PBX Wizard
    Version: 2.00.34
    Build: 0

File: w2cTspSetup.exe
    Description: Way2call TAPI Setup
    Version: 1.0.0.2
    Build: 0

File: \drivers\ScIPTsa.sys
     Not required - For RS232 devices.

File: w2cRS232Wave.drv
     Not required - For RS232 devices.

File: w2cUsb.dll
    Description: Hi-Phone User Mode Device Driver
    Version: 2.0.9.2
    Build: b0001

File: ml_setup.exe
    Description: Way2call Multiple Hi-Phone Devices Drivers installer
    Version: 2.0.0.42
    Build: b001

File: w2cMultiInfo.exe
    Description: Way2call drivers infromation
    Version: 1.0.0.4
    Build: 0


Audio IN devices:
  0. Hi-Phone Desktop USB Aux
  1. SoundMAX Digital Audio
  2. Hi-Phone Desktop USB

Audio OUT devices:
  0. Hi-Phone Desktop USB
  1. SoundMAX Digital Audio

]]> Mon, 12 Oct 2009 10:47:27 +0000 http://www.way2call.com/forum/detecting-hangup_topic38_post94.html#94 Hi-Phone and TAPI : Can't see Modem in device list http://www.way2call.com/forum/cant-see-modem-in-device-list_topic34_post88.html#88 Author: doronsh
Subject: Can't see Modem in device list
Posted: Sep 20 2009 at 9:10am

When using TAPI application, and sometime other application:

After first time Hi-Phone driver’s installation, you should restart the PC in order to enable the WIN TAPI service to detect the Hi-Phone products.

Also, during ongoing operation, when the PC restarts the Hi-Phone should be connected.

Applications may not see the Hi-Phone, if the Hi-Phone device is connected after the PC starts.

 

]]> Sun, 20 Sep 2009 09:10:11 +0000 http://www.way2call.com/forum/cant-see-modem-in-device-list_topic34_post88.html#88 Hi-Phone and TAPI : Can't see Modem in device list http://www.way2call.com/forum/cant-see-modem-in-device-list_topic34_post87.html#87 Author: mike
Subject: Can't see Modem in device list
Posted: Sep 17 2009 at 9:17am

I have a Way2Call DeskTop USB modem. The test wizard says that everything is working, but none of my software works with the modem. When I try to configure the modem, it does not show up in the device list. What am I doing wrong?
Mike
]]> Thu, 17 Sep 2009 09:17:10 +0000 http://www.way2call.com/forum/cant-see-modem-in-device-list_topic34_post87.html#87 Hi-Phone and TAPI : Tapi in Hi-device http://www.way2call.com/forum/tapi-in-hidevice_topic30_post86.html#86 Author: doronsh
Subject: Tapi in Hi-device
Posted: Sep 10 2009 at 7:54pm

Make sure that you are using the Multiple Devices Drivers]]> Thu, 10 Sep 2009 19:54:46 +0000 http://www.way2call.com/forum/tapi-in-hidevice_topic30_post86.html#86 Hi-Phone and TAPI : Tapi in Hi-device http://www.way2call.com/forum/tapi-in-hidevice_topic30_post78.html#78 Author: Nirmal
Subject: Tapi in Hi-device
Posted: Jul 17 2009 at 4:53am

Hi,
 
Im having Both Hi-Phone device and Hi-Phone Destop USB in the dialer window while selecting Devices in the option dialog box. Clearly, I have no Idea about that. I need to execute TAPI in my PC. My task is to remind my customers. Previously, Im using  Hi-Phone device alone.Program worked well. But now Im having both Hi-Phone device and Hi-Phone Desktop USB( Is there any difference between them?). But the program is not working properly.
 
please help me !!!!Cry
 
-Nirmal L-Cube innovative
]]> Fri, 17 Jul 2009 04:53:15 +0000 http://www.way2call.com/forum/tapi-in-hidevice_topic30_post78.html#78 Hi-Phone and TAPI : Download http://www.way2call.com/forum/download_topic1_post1.html#1 Author: admin
Subject: Download
Posted: Oct 25 2008 at 10:37am

 

Updated Way2call Hi-Phone TAPI drivers can be downloaded from www.way2call.com >>> downloads

Beta released Hi-Phone TAPI drivers can be downloaded from www.way2call.com >>> developers >>> file downloads area

 



Edited by admin - Feb 15 2009 at 6:24pm]]> Sat, 25 Oct 2008 10:37:08 +0000 http://www.way2call.com/forum/download_topic1_post1.html#1